 |
44/49 |  |
Plate Heat Exchanger Power X-PWT 427-VA - 195 kW - 70°C
Plate Heat Exchanger Power X-PWT 427-VA - 195 kW - 70°C
Description
Thanks to their large surface area, plate heat exchangers are particularly suitable for low-temperature heating systems such as solar systems, geothermal systems, heat pumps, and other alternative and ... Read more-
Plate Heat Exchanger Power X-PWT 427-VA - 195 kW - 70°C
Thanks to their large surface area, plate heat exchangers are especially suitable for low-temperature heating systems such as solar systems, geothermal systems, heat pumps, and other alternative and innovative heating systems. Their design makes them suitable for both small and large pools. Bolted plate heat exchangers operate with high efficiency and low pressure losses. The best heating results are achieved in combination with a pool heat pump or solar heating. Water flow in plate heat exchangers is lower, and compared to tube heat exchangers they also have a smaller connection diameter. However, the water is heated to a higher temperature. Unlike traditional designs, a brazed heat exchanger consists only of surfaces that actively contribute to heat transfer, resulting in a significant increase in overall efficiency.
X-PWT plate heat exchangers must be installed in a vertical position. Any other position prevents sufficient water flow and proper heat exchange. The exchanger connection threads must not be subjected to any excessive pressure. If the supply piping is long and could place a load on the threads, the pipes must be supported.
Heat exchangers are specifically designed for heating pool water, water in hot tubs and spas, or for underfloor heating. The exchanger design is optimized to restrict flow so that heat input is maximized while pressure in the heating system is minimized. Titanium is one of the most durable materials, which is why these exchangers can also be used for salt water or other aggressive media.
Advantages
- High quality
- Improved energy efficiency
- Chemical resistance
- Must be integrated directly into the pool water circuit
Use:
- pools
- hot tubs
Power kW
Heat output 195 kW Primary temperature 70 / 42.4 °C Secondary temperature 20 / 48 °C
Technical parameters
- Output: 195 kW
- Flow rate (primary): 6.2 m3 / h
- Pressure loss (primary): 0.22 bar
- Flow rate (secondary): 6.0 m3 / h
- Pressure loss (secondary): 0.23 bar
- For pools up to: 160 - 170 m3
- Pool water temperature: 20 °C
- Installation: Bypass
- Number of plates: 27
- Maximum operating temperature: 90 °C
- Max. pressure 1000 kPa: 10 bar
- Brazed gasket: max. 150 °C
- Weight: 31 kg
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
