 |
43/49 |  |
Plate Heat Exchanger Power X-PWT 423-VA - 170 kW - 70°C
Plate Heat Exchanger Power X-PWT 423-VA - 170 kW - 70°C
Description
Thanks to their large surface area, plate heat exchangers are especially suitable for low-temperature heating systems such as solar systems, geothermal systems, heat pumps, and other alternative and innovative ... Read more-
Power X-PWT 423-VA Plate Heat Exchanger - 170 kW - 70°C
Thanks to their large surface area, plate heat exchangers are especially suitable for low-temperature heating systems such as solar systems, geothermal systems, heat pumps, and other alternative and innovative heating systems. Their design makes them suitable for both small and large pools. Bolted plate heat exchangers operate with high efficiency and low pressure loss. They deliver the best heating results when combined with a pool heat pump or solar heating. Water flow through plate exchangers is lower, and compared to tube exchangers they also have a smaller connection diameter. However, the water is heated to a higher temperature. Unlike traditional designs, a brazed heat exchanger consists only of surfaces that actively contribute to heat transfer, resulting in a significant increase in overall efficiency.
X-PWT plate exchangers must be installed in a vertical position. Any other position prevents sufficient water flow and proper heat exchange. The exchanger connection threads must not be subjected to any excessive pressure. If the supply piping is long and could put strain on the threads, the pipes must be supported.
By design, these heat exchangers are specially developed for heating pool water, water in whirlpools and spas, or for underfloor heating. The exchanger design is optimized to limit flow so as to maximize heat transfer while minimizing pressure in the heating system. Titanium is one of the most durable materials, which is why these exchangers can also be used for salt water or other aggressive media.
Advantages
- High quality
- Improved energy efficiency
- Chemical resistance
- Must be integrated directly into the pool water circuit
Use:
- pools
- whirlpools
Power kW
Heat output 170 kW Primary temperature 70 / 42.5 °C Secondary temperature 20 / 47.5 °C
Technical parameters
- Output: 170 kW
- Flow rate (primary): 5.4 m3 / h
- Pressure loss (primary): 0.23 bar
- Flow rate (secondary): 5.3 m3 / h
- Pressure loss (secondary): 0.25 bar
- For pools up to: 140 - 160 m3
- Pool water temperature: 20 °C
- Installation: Bypass
- Number of plates: 23
- Maximum operating temperature: 90 °C
- Max. pressure 1000 kPa: 10 bar
- Bonded gasket: max. 150 °C
- Weight: 30 kg
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
