 |
46/49 |  |
Plate Heat Exchanger Power X-PWT 435-VA - 260 kW - 70°C
Plate Heat Exchanger Power X-PWT 435-VA - 260 kW - 70°C
Description
Thanks to their large surface area, plate heat exchangers are especially suitable for low-temperature heating systems such as solar systems, geothermal systems, heat pumps, and other alternative and innovative ... Read more-
Plate Heat Exchanger Power X-PWT 435-VA - 260 kW - 70°C
Thanks to their large surface area, plate heat exchangers are especially suitable for low-temperature heating systems such as solar systems, geothermal systems, heat pumps, and other alternative and innovative heating systems. Their design makes them suitable for both small and large swimming pools. Bolted plate heat exchangers operate with high efficiency and low pressure losses. The best heating results are achieved in combination with a pool heat pump or solar heating. Water flow in plate exchangers is lower, and compared to tubular exchangers they also have a smaller connection diameter. However, the water is heated to a higher temperature in them. Unlike traditional designs, a brazed heat exchanger consists only of surfaces that actively contribute to heat transfer, resulting in a significant increase in overall efficiency.
X-PWT plate exchangers must be installed in a vertical position. Any other position prevents sufficient water flow and perfect heat exchange. The exchanger connection threads must not be subjected to any excessive pressure. If the supply piping is long and could put stress on the threads, the pipes must be supported.
Heat exchangers are specially designed for heating pool water, water in whirlpool tubs and spas, or for underfloor heating. The exchanger design is created with flow restriction in mind so that it maximizes heat supply while minimizing pressure in the heating system. Titanium is one of the most durable materials, which is why these exchangers can also be used for salt water or other aggressive media.
Advantages
- High quality
- Increased energy efficiency
- Chemical resistance
- Must be integrated directly into the pool water circuit
Use:
- swimming pools
- whirlpools
Power kW
Heat output 260 kW Primary temperature 70 / 41.6 °C Secondary temperature 20 / 48 °C
Technical parameters
- Output: 260 kW
- Flow rate (primary): 8.0 m3 / h
- Pressure loss (primary): 0.22 bar
- Flow rate (secondary): 8.0 m3 / h
- Pressure loss (secondary): 0.24 bar
- For pools up to: 200 - 220 m3
- Pool water temperature: 20 °C
- Installation: Bypass
- Number of plates: 35
- Maximum operating temperature: 90 °C
- Max. pressure 1000 kPa: 10 bar
- Bonded gasket: max. 150 °C
- Weight: 34 kg
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
