Package Contents

• complete control unit with pumps
• control flow meter with filter and tubing
• Long Life pH probe
• Long Life Redox probe
• connecting PE pipe 1/4“ (6.35 mm) transparent / 20 m
• chemical injection valves 2 pcs
• water shut-off fittings 2 pcs
• weight for chemical canisters 1 pc
• probe wrench 1 pc
• set of wall plugs with screws

Measured Water Connection

The pool water intended for measurement must be connected to the ASIN AQUA. Connect the measured water inlet after the pump, before the filter and coagulation mixer. The shut-off valve is installed in a DN50 plug with G1/4“ thread, glued into the T-piece. For connecting the measured water to your ASIN AQUA, Aseko provides a unique Speedfit connection fitting. To connect, push the connecting pipe into the Speedfit connector and then secure it by pulling on the tubing. To disconnect, press and hold the circular collet and pull out the connecting pipe.

WARNING: use a sharp knife to prepare the pipe ends (included in the delivery).
Using scissors or pliers will deform the end of the tubing and cause leaks.

WARNING: tighten by hand only. Do not use pliers or other tools.

1. To ensure leak-tight joints, cut the pipes at a 90° angle.
2. Use a sharp knife to cut the plastic. The cut must be clean and smooth.
3. Connect the water inlet to the measured water filter connection and the outlet to the connection on the
   probe tank. Make sure the measured water pressure does not exceed 1.5 bar.
4. The outlet from the tank can be made:

• after filtration
• to a pressureless tank (overflow tank)

Aseko Pool Live App

An app for iOS and Android smartphones that gives you an overview of your pool’s status wherever you are connected to the internet. ASIN AQUA automatically sends an alert message to your smartphone if one of the selected limit values is exceeded or if a system error occurs. You can easily monitor the amount of chemicals in the canisters so you can order new chemicals in time. Pool LIVE for iOS Pool LIVE for Android.