 |
14/16 |  |
Aseko Asin Aqua S CLF Dosing Station
Aseko Asin Aqua S CLF Dosing Station
Description
ASIN Aqua S CLF is a dosing controller equipped with a CLF probe for measuring free chlorine and a pH probe. It is suitable for use together with ASIN Salt (saltwater electrolyzer). Read more
-
Aseko Dosing Station Asin Aqua S CLF
ASIN Aqua S CLF is an automatic dosing unit equipped with a CLF probe for measuring free chlorine and a pH probe. Suitable for use in combination with ASIN Salt (saltwater electrolyzer).
Pool Water Treatment:
- In combination with a saltwater electrolyzer, it ensures high chlorine production
- Free chlorine content control using the CLF probe
- pH control using the pH probe
Package Contents
- complete control unit with pump
- control flow meter with filter and tubing
- Long Life pH probe, 1 pc
- CLF probe, 1 pc
- connecting PE tubing 1/4“ (6.35 mm), transparent / 20 m, 1 pc
- chemical injection valves, 1 pc
- weight for chemical canisters, 1 pc
- Aseko Pool Tester, 1 pc
- probe key, 1 pc
- set of wall plugs with screws
Connecting the Measured Water
The pool water intended for measurement must be connected to the ASIN AQUA. Connect the measured water inlet after the pump, before the filter and coagulation mixer. The shut-off valve is installed in a DN50 plug with G1/4“ thread, glued into a T-piece. For connecting the measured water to your ASIN AQUA, Aseko provides a unique Speedfit connection fitting. To connect, push the connecting tubing into the Speedfit connector and then secure it by pulling on the tube. To disconnect, press and hold the circular collet and pull out the connecting tubing.
WARNING: use a sharp knife to prepare the ends of the tubing (included in the delivery).
Using scissors or pliers will deform the end of the tubing and lead to leaks.WARNING: tighten only by hand. Do not use pliers or any other tools.
- To ensure leak-tight connections, cut the tubing at a 90° angle.
- Use a sharp knife to cut the plastic. The cut must be clean and smooth.
- Connect the water inlet to the measured water filter connection and the outlet to the connection on the probe tank. Make sure that the pressure of the measured water does not exceed 1.5 bar.
- The outlet from the tank can be routed:
- after filtration
- to a pressure-free line (overflow tank)
Technical Specifications
- Power supply: 230 V / 50 Hz
- Power input: 14 VA
- Fuse: T80 mA
- Overvoltage category: II
- Protection rating: IP50
- Operating temperature and humidity: +5 to +40°C / 60%
- Weight: 2.2 kg
- Installation: wall-mounted
- Measured values: pH, chlorine
- Controlled values: pH, chlorine
- Pump output: 60 ml / min. (max. 1 bar)
- Measured water pressure: max. 1.5 bar
Aseko Pool Live App
An app for iOS and Android smartphones that gives you an overview of your pool’s status wherever you are connected to the internet. ASIN AQUA automatically sends an alert message to your smartphone if one of the selected limit values is exceeded or if a system error occurs. You can easily monitor the amount of chemicals in the canisters so you can order new chemicals in time. Pool LIVE for iOS Pool LIVE for Android.
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
