 |
46/52 |  |
Griffon Poly Max Fix & Seal Express mounting adhesive 425 g transparent
Griffon Poly Max Fix & Seal Express mounting adhesive 425 g transparent
Description
Poly Max Fix & Seal in transparent is a premium mounting adhesive and sealant in one, based on advanced MS polymer technology. Read more
Product code: 6150452
-
Griffon Poly Max Fix & Seal Express mounting adhesive 425 g transparent
Poly Max Fix & Seal in transparent is a premium mounting adhesive and sealant in one, based on advanced MS polymer technology. This product was developed to replace traditional nails, screws, and various types of sealants, while delivering professional results both indoors and outdoors. Thanks to its extremely high initial tack and permanent elasticity, it is ideal for bonding, mounting, and sealing almost all building materials (wood, stone, concrete, metals, plastics, glass, and more) on both smooth and porous surfaces - even underwater or on damp substrates. The adhesive is 100% waterproof, resistant to UV rays, mold, and weathering. It contains no solvents, does not shrink, and is paintable after curing.
Features
- Exceptional and permanent flexibility: The bond remains flexible over the long term, allowing it to perfectly absorb vibrations and material movement.
- Express strength build-up: The adhesive achieves high bonding strength in a very short time after application.
- Excellent gap-filling ability: Effectively fills unevenness, gaps, and cracks in the substrate.
- Reliable and lasting adhesion: Ensures stable, long-term bond strength throughout its service life.
- Does not shrink and holds 100%: The material does not lose volume and provides maximum adhesion to the surface without the risk of peeling off.
- Clean solvent-free formula: An eco-friendly formulation that is gentle on materials and does not emit an unpleasant odor.
- Safe for joint edges: Does not create stains or greasy marks around the bonded area (e.g. on natural stone).
- Maximum weather resistance: Easily withstands rain, frost, direct sunlight, and UV radiation.
- High temperature stability: Retains its properties in extreme conditions from –40 °C to +100 °C.
- Paintable: After curing, the surface can be easily painted with most types of paint.
- Efficient curing: Curing speed is approximately 2 mm per 24 hours (depending on humidity and temperature).
- Mold protection: Thanks to fungicidal ingredients, it is also ideal for humid environments, where it helps prevent mold growth.
Instructions for use
- Surface preparation: Before application, make sure all surfaces are clean and free of dust, grease, and loose particles.
- Cartridge preparation: Using a universal tool or a sharp knife, cut off the plastic thread at the top of the cartridge. Screw on the application nozzle and cut it diagonally to the desired opening size (a diameter of at least 5 mm is recommended).
- Application: Insert the cartridge into the dispensing gun. When bonding, apply the adhesive in dots or vertical strips (10–15 cm apart). When sealing, apply the material evenly directly into the joint or crack.
- Joining and smoothing: Press the materials together firmly and, if necessary, secure them in place. If using the product as a sealant, smooth the surface with a damp tool or finger within 10 to 15 minutes after application.
- Curing: Leave the bond undisturbed to dry. The surface skins over in about 15 minutes, and the sealant fully cures at a rate of approx. 2 mm per day.
-
Related products
Availability:
Availability:
Availability:
Availability:In stock
Availability:
Availability:
Availability:
Availability:
Share this product
