 |
2/5 |  |
Fix a Leak 0.94 l, a product for stopping water leaks from the pool
Fix a Leak 0.94 l, a product for stopping water leaks from the pool
Description
Liquid concentrated sealant for sealing virtually all materials - holes up to 3.17 mm in diameter. Read more
Product code: 911520100
-
Fix a Leak 0.94 l, product for stopping water leaks from the pool
Fix a Leak 0.94 l is a special liquid product designed to stop minor water leaks from the pool without the need to drain it. It effectively seals leaks in pool walls, piping, joints, skimmers, and other hard-to-reach areas - openings up to 3.17 mm in diameter.
The product is easy to apply directly into the water, where it actively seeks out and seals leak points. It is suitable for all types of pools and surfaces and does not damage the filtration system or pool chemicals.
Package volume: 0.94 l
Instructions for use – Fix a Leak 0.94 l
1. Preparing the pool system
- Disconnect or redirect the filtration system to recirculation mode, so that the water does not pass through the filter media (e.g. sand or DE filter).
- For other filters, it is recommended to remove the filter cartridges or create a bypass of the filtration system ﹣ this will allow the product to pass through the entire circuit without clogging the filter elements.
2. Applying the product
- Before use, shake the bottle well.
- Slowly pour 0.94 l of the product through the skimmer or another suction inlet, or next to the main drain, with the water circulation running in recirculation mode.
- Fix a Leak is heavier than water and tends to settle at the bottom drain – during the next 4–6 hours of circulation, we recommend stirring it with a small pool brush or pole so it does not settle on the bottom.
3. Action time
- Let it circulate for 8–10 hours a day for 2–3 days, until the leak stops completely.
- During the next 48–72 hours without water circulation, the chemical will slowly harden and seal the leak – before resuming normal filtration, it is recommended to manually stir the contents at least 3–4 times a day and ensure contact of the product with the damaged area (e.g. using a brush on a pole).
4. Restoring filtration
- After the water leak has been successfully stopped, let the product work for at least another 24–48 hours so it can fully cure.
- Then switch the filtration back to standard filtration mode, and rinse or clean the filter if needed.
Features
0.94 l = 83 m3 seals holes with a diameter of up to 3.17 mm as a sealant, it can be applied permanently
-
Related products
Availability:
Availability:
Availability:In stock
Availability:
Availability:
Availability:
Availability:
Availability:
Share this product
