SB-POOL SEALER for sealing cracks and leaks in the pool 1 L

Product for sealing cracks in the pool and in water pipes. Seals leaks up to 5 mm. Suitable for all types of pools (however, it must not get into the filtration system. 

- 1-2 litres per 100m³ of water, max. 4 litres per 100m³ of water

Use

• Determine the water loss over 24 hours by measuring the drop in water level during this period and select the required amount of Fix-A-Leak
• Fill the hot tub back to the original level and mark the water line
• Remove all filter cartridges or other filtration equipment. For sand filters, set the filter valve to "Recirculation".
• Be sure to shake the bottle well, as the product is very heavy and will sink to the bottom. Placing the bottle in a container of hot water before shaking will ensure proper mixing of the product
• With the pump(s) running, gradually add the recommended dose into the skimmer or, in overflow pools, directly into the pool near the return jets to help homogenize the product. Also open all massage jets.
• Keep the filtration system running - recirculation position - until the leak(s) are sealed and no water escapes.
• Check the water level for 2 to 3 days. If the level remains the same, the leak has stopped
• When the leak(s) have disappeared, set the system to the "filtration" position (after reinstalling the filter elements that were removed during the leak repair).

We recommend not using the hot tub until the leak has been eliminated and the remaining SB-Pool Leak Sealer product has been filtered out or drained from the hot tub/spa.

Related products

Fix a Leak 0.94 l, a product for stopping water leaks from the pool

Liquid concentrated sealant for sealing virtually ...

Product code: 911520100

Read more

Availability:

36 more