 |
31/35 |  |
Polystyrene block Porocell BigBlock EPS30 1250x500x250mm
Polystyrene block Porocell BigBlock EPS30 1250x500x250mm
Description
Porocell blocks, thanks to their shape, make it easy to build a pool even on your own. Read more-
Polystyrene Block Porocell BigBlock EPS30 1250x500x250mm
Thanks to their shape, Porocell blocks make it easy to build a pool even on your own, without the need for formwork or additional thermal insulation. The system consists of high-density extruded polystyrene blocks that can be cut every 25 cm with a knife or saw. Every structural pool component, such as the skimmer, nozzles, underwater lights, or counter-current system, can be installed easily and precisely. The easy workability of the material gives great freedom in choosing the pool shape and excellent adaptability to the selected dimensions.
The blocks are installed on a reinforced concrete slab and, after reinforcement with steel rebar, are filled with mixer concrete. Geotextile is attached to the base slab and along the perimeter walls. In the case of prefabricated replaceable liners, profiles are attached to the pool edges, allowing the liner to be fixed easily; alternatively, heavy-duty pool liners are applied by welding.
Up to 80% of heat escapes from the pool through the water surface. Nevertheless, it is highly recommended to thermally insulate the pool walls as well. By using Porocell blocks, the water in the pool heats up faster, so the swimming season can start earlier and last longer, even at the end of summer. Pools built from Porocell make use of solar radiation to warm the pool water. By using heat from a heat pump, you can enjoy the benefits of your pool significantly longer than with other types of pools.
The pool perimeter walls are also affected by temperature fluctuations and frost, which can cause expansion and stress that may damage the pool liner or even the structure itself. The Porocell system withstands these influences and absorbs all stresses.
Porocell polystyrene blocks are available in BigBlock or EcoBlock versions. The volume of one BigBlock is 0.083 m3, and it requires 83 liters of concrete to fill it. The volume of an EcoBlock is 0.033 m3, and 33 liters of concrete are needed to fill one block.
Technical parameters
- Volume: 0.083 m3
- Dimensions: 1250 x 500 x 250 mm
OUT OF STOCK!
The goods cannot be delivered according to the standard SPS and SDS rates specified in the online store! Several pallets of the required masonry elements may be needed for the pool. For this reason, we provide a separate individual price for each order!
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
