 |
51/52 |  |
Griffon EPDM MAX - adhesive and sealant 465 g
Griffon EPDM MAX - adhesive and sealant 465 g
Description
Universal waterproof adhesive and sealant with strong initial adhesion based on SMP polymer for EPDM on almost all surfaces. Read more
-
Griffon EPDM MAX - Adhesive and Sealant 465 g
Universal waterproof adhesive and sealant with strong initial tack, based on SMP polymer for EPDM, suitable for almost all surfaces. For bonding or sealing all European types of EPDM to practically all surfaces, such as wood, metal, concrete, stone, and rigid foam insulation. Also suitable for repairing cracks in EPDM and sealing joints between EPDM and various surfaces. Not suitable for PE, PP, PTFE, bitumen, or neoprene. It is recommended to carry out an initial bonding test on every surface.
Features
- Adheres and seals almost all surfaces
- Strong adhesion
- Easy and quick to use (no primer required)
- Load-bearing after 24 hours
- Permanently flexible
- Does not shrink or form bubbles / blisters
- Weather-, water- and moisture-resistant
- Temperature resistance -40 °C / +100 °C
- Odorless
- Solvent-, toluene- and phthalate-free
Preparation
- Working conditions: Processing temperature: +5 °C to +35 °C.
- Surface requirements: Apply the adhesive to one side of a firm, clean, dust- and grease-free surface.
Instructions for use
Before use, open the cartridge by cutting off the plastic nozzle above the thread using a multifunctional
tool. Attach the nozzle to the cartridge and cut it at an angle to the required diameter.
Cut the thread, assemble the nozzle, and cut it to a diameter of at least 0.5 cm.
Apply the adhesive in beads (6 mm wide) and then press firmly together. After 24 hours, seal by hand,
final strength after 48 hours on a porous surface.
Stains / residue: Dried residue can only be removed mechanically.
-
Related products
Availability:
Availability:
Availability:
Availability:In stock
Availability:
Availability:
Availability:
Availability:
