
Product for reducing water hardness and removing metals and metallic or calcium deposits from pool water, pool walls, and the pool floor. There is no need to drain the pool, and the pool is ready for use immediately after the product is applied.
Use: for hard to very hard water and excessive levels of iron, copper, silver, or calcium in the water. Water hardness is measured with testers and divided into 5 levels:
0-4 dGH/0-70 ppm ... very soft water
4-8 dGH/70-140 ppm ... soft water
8-12 dGH/140-210 ppm ... moderately hard water
These results are optimal for pool water.
12-18 dGH/210-320 ppm ... hard water
18-30 dGH/320-530 ppm ... very hard water
When these values are reached, water treatment is necessary.
Dosage: 0.3 to 0.6 l per 10 m3 of water. Apply the product with the filtration system running, and leave the filtration on for 48 hours. After this time, clean the filter.
Application: before applying MetalMagic, adjust the water pH to above 7.5. After cleaning the filter, check and adjust the pH again to 7.1–7.4.
Before use, we recommend reading the instructions carefully.