 |
38/45 |  |
AstralPool CTX-392 Triplex - (slow-dissolving chlorine 200 g tablets) 1 kg
AstralPool CTX-392 Triplex - (slow-dissolving chlorine 200 g tablets) 1 kg
Description
Tablet biocidal product based on chlorine, with its comprehensive effect, ensures the removal of bacteria, viruses, and other harmful microorganisms from pool water, prevents the formation of algae, and ... Read more
-
AstralPool CTX-392 Triplex - (slow-dissolving chlorine 200 g tablets) 1 kg
A tablet biocidal product based on chlorine, with its comprehensive action it ensures the removal of bacteria, viruses and other dangerous microorganisms from pool water, prevents the formation of algae, and at the same time keeps the water crystal clear thanks to its flocculating effect. The product contains 93% trichloroisocyanuric acid, 2-4% sulfate and 1-3% aluminum sulfate. Multifunctional chlorine products have disinfecting, flocculating and algicidal effects. At the same time, they are highly stable and resistant to decomposition by sunlight.
Dosing
- Initial dosing: After reaching the permitted free chlorine level (0.3-0.6 g / m3 of water) e.g. using CTX-200 / GR, apply 1 tablet (200 g) of CTX-392 for every 20 m³ or 1 tablet (20 g) of CTX-343 for every 2 m3 of pool water volume.
- Further dosing: 0.5 - 1 g of CTX-Triplex / m3 of water daily, with pH maintained at the required level of 7.2 - 7.6, so that the free Cl content does not exceed 0.6 g / m3. Check the free Cl content in the water daily with a tester (Cl + pH). The actual dosage should be adjusted depending on the pool’s operating conditions, water temperature and the level of contamination.
Warning
The product may only be used in pools with a filtration unit. The product must not be applied directly onto the water surface, and for safety reasons it must also not be placed in floating dispensers directly in the pool (when using all types of chlorine products in a floating dispenser, there is a risk of burns and skin irritation, especially for children).
After applying the product, it is necessary to check the concentration of free Cl in the water with a tester (e.g. Code 03253). If the free Cl content is higher than 0.6 g / m3, wait or use a Cl neutralizer and use the pool only after the value drops below or to the stated level. In all pools, the water should be regularly replaced to prevent increased mineralization and cyanuric acid content - the recommended concentration is 35 g / m3 (check with a tester or photometer). Also regularly measure the level of combined Cl (chloramines), and if its concentration is 0.3 g / m3 or higher, carry out superchlorination with CTX-200 / GR.
Safety warning
Use biocidal products safely. Always read the label and product information before use.
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:In stock
Availability:
Availability:In stock
Availability:
