 |
39/45 |  |
AstralPool CTX-392 Triplex - (slow-dissolving chlorine 200 g tablets) 5 kg
AstralPool CTX-392 Triplex - (slow-dissolving chlorine 200 g tablets) 5 kg
Description
Tablet biocidal product based on chlorine, with its comprehensive effect, ensures the removal of bacteria, viruses, and other dangerous microorganisms from pool water, prevents the formation of algae, ... Read more
-
AstralPool CTX-392 Triplex - (slow-dissolving chlorine 200 g tablets) 5 kg
A tablet biocidal product based on chlorine, whose complex action ensures the removal of bacteria, viruses, and other dangerous microorganisms from pool water, prevents the formation of algae, and at the same time keeps the water clear thanks to its flocculating effect. The product contains 93% trichloroisocyanuric acid, 2-4% sulfate, and 1-3% aluminum sulfate. Multifunctional chlorine products have disinfecting, flocculating, and algicidal effects. At the same time, they are highly stable and resistant to decomposition by sunlight.
Dosage
- Initial dosage: After reaching the permitted free chlorine level (0.3 - 0.6 g / m3 of water), e.g. with CTX-200 / GR, apply 1 tablet (200 g) of CTX-392 for every 20 m³ or 1 tablet (20 g) of CTX-343 for every 2 m3 of pool water volume.
- Further dosage: 0.5 - 1 g CTX-Triplex / m3 of water daily, with pH kept at the required level of 7.2 - 7.6, so that the free chlorine content does not exceed 0.6 g / m3. Check the free chlorine content in the water daily with a tester (Cl + pH). The actual dosage should be adjusted depending on the pool’s operating conditions, water temperature, and the level of contamination in the pool.
Warning
The product may only be used in pools with a filtration unit. The product must not be applied freely onto the water surface and, for safety reasons, not even in floating dispensers directly in the pool (when using all types of chlorine products in a floating dispenser, there is a risk of burns and skin irritation, especially in children).
After applying the product, it is necessary to check the concentration of free chlorine in the water with a tester (e.g. Code 03253). If the free chlorine content is higher than 0.6 g / m3, you must wait or use a chlorine neutralizer and use the pool only after the value drops below or to the stated level. For all pools, the water should be regularly replaced to prevent an increase in mineralization and cyanuric acid content - the recommended concentration is 35 g / m3 (check using a tester or photometer). Also regularly measure the bound chlorine content (chloramines), and if its concentration is 0.3 g / m3 or higher, carry out superchlorination with CTX-200 / GR.
Safety warning
Use biocidal products safely. Always read the label and product information before use.
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:In stock
Availability:
Availability:In stock
Availability:
