| 1/5 |  |
Inverter Pool Pump iGarden Aquagem INVERPro IP20 with Wi-Fi Module, 0.09 - 0.84 kW 6 - 20 m3/h
Inverter Pool Pump iGarden Aquagem INVERPro IP20 with Wi-Fi Module, 0.09 - 0.84 kW 6 - 20 m3/h
Description
The InverPRO pool pump is up to three times quieter than standard pumps available on the market. It is the quietest pump in the pool industry - noise level at 1 meter: 36 dBA, certified by TÜV Rheinland. ... Read more-
Inverter Pool Pump iGarden Aquagem INVERPro IP20 with Wi-Fi Module, 0.09 - 0.84 kW 6 - 20 m3 / h
The InverPRO pool pump is up to three times quieter than commonly available pumps. It is the quietest pump in the pool industry - noise level at 1 meter: 36 dBA, TÜV Rheinland certified. The InverPro pump stands out thanks to its automatic intelligent InverSilence operation. This pump is inverter-controlled, allowing it to detect system pressure and adjust its operating capacity so that a stable operating flow is always maintained. Operation and parameter setting are very simple and intuitive thanks to the large touch panel.
Maximum Quiet Operation
The built-in smart inverter allows the product to operate not only in the range of 30% ~ 100% to handle various tasks such as backwashing and proper filtration, but also provides precise motor and inverter drive control for optimally quiet operation. As a result, the noise level is reduced from the high 60-70 dBA range to a historically low level, up to 30x quieter than conventional pumps.
Energy Savings of up to 80%
The combination of full inverter technology, a special hydraulic system, and an efficient PMSM system in a TEFC design ensures intelligent pump operation. Thanks to variable filtration speed settings, maximum filtration efficiency can be achieved while saving up to 80% energy.
Smart Touch Control
The InverPRO heat pump is equipped with modern, fully touch-sensitive controls with preset automatic or manual mode. The pump can be controlled via the InverFlow app, which can be installed on both Android and iOS. Thanks to the Wi-Fi module, you can also control the pump remotely.
InverPro Advantages:
- Quiet
- 2 operating modes: automatic and manual
- Energy consumption measurement and display
- Volumetric flow measurement and display
- Backwashing at the push of a button
- External control: RS485 Modbus, digital input, relay output
- Soft start: complete protection of the electrical system
- InverSilence technology: a combination of the quietest and most energy-efficient operation
Electricity Savings Calculation
- A conventional pump has an input power of 0.8 kW / h. When filtering 8 h / day = 6.4 kW per day. For an outdoor pool, filtration runs approx. 200 days (6.5 months), i.e. 6.4 kW x 200 days = 1280 kW (1.28 MW)
- The InverPRO pump has an input power of 0.2 kW / h when filtering 10 h / day = 2 kW per day. For an outdoor pool, filtration runs approx. 200 days (6.5 months), i.e. 2 kW x 200 days = 400 kW (0.4 MW)
Performance
Package Contents
- Pump
- Cover with gasket
- Internal debris basket
- Key for loosening or tightening the cover
- 3 m power cable without plug
- 1 m grounding cable
- Two 63 mm unions for suction and discharge
- Connecting cable for external control
- User manual
Technical Parameters
- Dimensions (L x W x H): 606 x 224 x 295 mm
- Voltage: 230 V
- Water flow rate: 6 - 20 m3 / h
- Max. head: 18 m
- Recommended pool size: 30 - 50 m3
- Input power: 0.09 - 0.84 kW
- Max. water temperature: 50°C
- Protection rating: IP55
- Connection - thread: 2“
- Connection - glue: 63 mm
- Suitable for salt water: yes
- Self-priming: yes
- Weight: 16.5 kg
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
