 |
10/11 |  |
Eberle HYG 6001 Controller - Mechanical Hygrostat
Eberle HYG 6001 Controller - Mechanical Hygrostat
Description
The EBERLE HYG 6001 controller is a reliable mechanical hygrostat for humid and chlorinated environments, such as a pool hall. It can be connected to all MICROWELL DRY units. Read more-
Eberle HYG 6001 Controller - Mechanical Hygrostat
The EBERLE HYG 6001 controller is a reliable mechanical hygrostat for humid and chlorinated environments, such as a pool hall. It can be connected to all MICROWELL DRY units.
The controller is equipped with a mechanical sensor based on synthetic fiber, which changes its length depending on the current relative humidity of the air. This change is then mechanically transferred to a microswitch, which activates or deactivates the output contact. The advantage of this solution is high reliability without the need to power any electronics, as well as resistance to interference. After setting the target humidity value using the rotary control on the front of the device, the hygrostat continuously compares the current value with the set one. If the set limit is exceeded (when used for dehumidification) or drops below this value (when used for humidification), the output contact is activated. Thanks to the switching hysteresis (approximately ±4%), stable operation without frequent switching is ensured, which extends the service life of the connected device. The device is designed for installation in a dry indoor environment.The Eberle HYG 6001 is a reliable, cost-effective, and easy-to-install solution for humidity control in both standard and technical applications. Thanks to its durable mechanical design, it is suitable for use in a wide range of spaces where digital precision is not required, but stable and robust operation is essential.
The dehumidifier with controller is connected using a CYSY 3x 1.0 mm cable.
Advantages
- Simple mechanical control without electronics
- Flexible use thanks to a wide power supply range
- High reliability and resistance to interference
- Maintenance-free
- Compatible with most dehumidification/humidification systems
Technical Parameters
Hygrostat
- Dimensions (h x w x d): 75 x 75 x 25.5 mm
- Humidity control range: 35% to 100% relative humidity
- Hysteresis: 4%
- Power supply: 24 V to 230 V AC, 50 / 60 Hz
- Main switch: no
- Housing color: white, RAL 9010
- Output: 5 (0.2) A
- Contact: 1-pole changeover
- Mounting: surface-mounted (wall-mounted), recommended height: approx. 1.5 m above the floor
- Protection rating / protection class: IP 30 / II
- Operating temperature: 0 °C to +55 °C
- Storage temperature: -10 °C to +60 °C
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
