
Liquid product for removing cloudiness in swimming pools.
Fine turbidity is constantly forming in pool water. These particles do not settle on the bottom of the pool or in the filtration system, but remain freely suspended in the water. Flocculants bind the micro-particles of this turbidity into fine, filterable flocs. The flocs trapped in the filter are easily removed during backwashing. As a result of flocculation of all microscopic impurities, the pool water becomes sparkling and crystal clear.
Liquid product for removing cloudiness in swimming pools.
Directions for use:
Use directly from the transport packaging. For continuous flocculation, set the dosing device to 1 - 7 g per every 10 m3 of circulating water. Ideal pH value: 7.0 - 7.4. If you want to replace Flockfix Super N (Product No. 0903) with Flockfix Flocculant (Product No. 0901), the entire circulation system must be thoroughly rinsed with clean water. Otherwise, there is a risk of flocculation of the products in the piping. Do not expose Flockfix Super N to temperatures below 10 °C. If the water is in good condition and the hygiene parameters are met, flocculation can be interrupted outside operating hours. Always first mix the product with water in a suitable container and then carefully pour it along the edges of the pool. Use the prepared solution within 1 week.
The product is not classified under the relevant regulations as a substance harmful to health; nevertheless, when using it, we recommend appropriate eye and skin protection. Before use, carefully read the instructions and product information.
Never mix with other chemicals.
Always read the label and product information before use.