Astralpool Sena pool pump, 9 m3/h 230V with single-phase motor

The pump body and base are made of thermoset plastic, the electric motor shaft is made of stainless steel, the distributor is made of polypropylene, and the coarse debris strainer has a transparent polycarbonate lid. Self-priming without a check valve up to a height of 2 m, enclosed motor with IP-55 electrical protection, connection by union nuts with a flanged ring D 50 mm. The pump output is also sufficient for connecting additional pool equipment, such as a heat pump or UV lamp.

AstralPool Sena pool pumps are designed for fresh water in both above-ground and in-ground pools. It is suitable for fresh chlorine treatment, oxygen water treatment, or biologically treated water in ponds. It is not suitable for salt chlorine treatment. 

The pump is designed for pools with a water volume of up to 45 m³ .

Technical parameters

• Output: 9 m³/h
• Discharge: for gluing  50 mm (1½")
• Suction: for gluing 50 mm (1½")
• Voltage: 230 V 
• Power input: 0.79 kW
• Max. pressure: 2.5 bar
• Noise level: 75 dBA
• Max. water temperature: 35°C
• Protection rating: IP 55
• Pump weight: 11.65 kg
• Use: It is suitable for fresh chlorine treatment, oxygen water treatment, or biologically treated water in ponds. It is not suitable for salt chlorine treatment.

The complete list of spare parts can be found here: 

Spare parts for Astralpool Sena pump, 9 m3/h 230V