
Tablet biocidal product based on chlorine, with its complex action, ensures the removal of bacteria, viruses, and other dangerous microorganisms from pool water, prevents algae growth, and at the same time keeps the water crystal clear thanks to its flocculating effect.
The product may only be used in pools with a filtration unit. The product must not be applied freely onto the water surface and, for safety reasons, not even into floating dispensers directly in the pool (when using all types of chlorine products in a surface float, there is a risk of burns and skin irritation, especially in children).
After applying the product, it is necessary to check the concentration of free Cl in the water with a tester (e.g. Code 03253). If the free Cl content is higher than 0.6 g / m3, wait or use a chlorine neutralizer and use the pool only after the value drops below or to the stated level. In all pools, the water should be regularly replaced to prevent increased mineralization and cyanuric acid content - the recommended concentration is 35 g / m3 (check using a tester or photometer). Also regularly measure the content of combined Cl (chloramines), and if its concentration is 0.3 g / m3 or higher, carry out superchlorination with CTX-200 / GR.
Use biocidal products safely. Always read the label and product information before use.