 |
11/11 |
Action-10 slow-dissolving 200 g chlorine tablets 5 kg
Action-10 slow-dissolving 200 g chlorine tablets 5 kg
Description
Biocidal product. 10 effects: disinfects, destroys and settles algae, destroys bacteria, destroys viruses, destroys fungal cultures, flocculates, coagulates impurities, lowers pH, stabilizes chlorine, ... Read more
-
Action-10 slow-dissolving chlorine tablets 200 g, 5 kg
Biocidal product. 10 effects: disinfects, destroys and settles algae, destroys bacteria, destroys viruses, destroys fungal cultures, flocculates, coagulates impurities, lowers pH, stabilizes chlorine, and prevents calcium deposits.
Form of product and active ingredient:
200 g tablets with a special composition for destroying bacteria, viruses, and microorganisms in pool water. The tablets also act preventively against the formation of water algae and help maintain crystal-clear water. This comprehensive product provides 10 effects to preserve the quality and hygienic safety of pool water.
Contains 90 - 100 g / 100 g trichloroisocyanuric acid, 2.4 g / 100 g copper sulfate, and 1 - 3 g / 100 g aluminum sulfate.
Dosage
- Initial dosage: once the free chlorine level reaches 0.6 g / m3 using fast-dissolving organic chlorine, apply 1 tablet (200 g) of Action-10 for every 20 m3 of pool water.
- Further dosage: 0.5-1 g of Action-10 per 1 m3 of water daily, so that the free chlorine content does not exceed 0.6 g / m3; keep pH at the required level of 7.2 - 7.6
Test the free Cl content in the water daily with a Cl + pH tester. Actual product consumption may vary depending on the pool’s operating conditions, water temperature, and level of contamination. Place the required amount of Action-10 tablets into the skimmer basket. Then switch on the filtration system. It is essential that the entire pool volume is filtered daily.
Warning
The product may only be used in a pool with a filtration system. For safety reasons, the product must not be applied freely onto the water surface or in a floating dispenser, as this may cause burns and skin irritation, especially in children. After application, it is necessary to check the concentration of free Cl in the water with a tester. If the free Cl content is higher than 0.6 g / m3, wait or neutralize the free Cl with a neutralizer (CTX - 12) to the stated level.
For all pools, the water should be replaced regularly to prevent increased mineralization and cyanuric acid content. Its maximum permissible concentration is 25 g / m3 (check with a tester). Regularly measure the level of bound Cl (chloramine), and if its concentration is 0.3 g / m3 or higher, carry out superchlorination with CTX-200 GR (10-15 g / m3 of water).
Safety warning
Use biocidal products safely. Always read the label and product information before use.
-
Related products
Availability:In stock
Availability:In stock
Availability:
Availability:
Availability:
Availability:
Availability:In stock
Availability:
