 |
43/52 |  |
Griffon Poly Max HT Express adhesive - white 435g
Griffon Poly Max HT Express adhesive - white 435g
Description
Solvent-free mounting adhesive based on SMP polymer with very high initial bond strength and very rapid strength build-up. Read more
-
Griffon Poly Max HT Express Adhesive - White 435 g
Solvent-free mounting adhesive based on SMP polymer with very high initial bond strength and extremely fast strength build-up. Suitable for bonding and fixing a wide range of building materials to almost all surfaces, including wood, plaster, (natural) stone, (aerated) concrete, metal, rigid foam, and various plastics. For plasterboard constructions: bonding and secure fixing of UW profiles to floors, ceilings, and walls. Can be used indoors and outdoors, for example on panels, ceiling elements, façade cladding, plasterboard, cladding and insulation materials, mirrors, wooden structures, mouldings, and battens. Suitable for all professional applications, including wall construction, interiors, houses, utility buildings, and vehicle bodies. It is ideal for construction sites as well as for household use for sealing in the kitchen, bathroom, outdoors and indoors, and for attaching heavy materials without the need for additional support.
Not recommended for materials such as PE, PP, PTFE, plaster, and bitumen. When bonding plastics, it is recommended to first carry out an adhesion test, as adhesion may vary depending on the type and quality of the plastic.Features
- Excellent for heavy materials.
- Very high initial bond strength
- Very fast strength build-up
- Permanently elastic
- Very good filling capacity
- Good long-term strength
- Non-shrinking
- 100% adhesive
- Solvent-free
- No edge staining of joints
- Weather-resistant
- Withstands temperatures between -40 °C and +100 °C
- Paintable
- Curing approx. 1.6 mm / 24 hours
Instructions for use
Before use, cut off the top of the cartridge above the thread with a sharp knife to remove the plastic nozzle insert. Then screw on the nozzle and cut it at an angle so that the opening is at least 5 mm in diameter. Use only the special nozzle supplied with the product. Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of 10 to 40 cm. Always apply adhesive in the corners and along the edges. To allow for movement between materials (for example façade boards), apply a 3 mm thick layer of adhesive (we recommend using spacers or tape). Install the materials with a sliding motion and press them firmly together or tap them into place with a hammer. Position correction is still possible. After finishing, close the cartridge carefully.
-
Related products
Availability:
Availability:
Availability:
Availability:In stock
Availability:
Availability:
Availability:
Availability:
