Logo www.aquapond.shop


<<  4/7 >>

Filtration unit - Martinic QS 500, on a pallet with Mr.Pump DE 18 pump, 18 m3/h, with a six-way valve Mr.Wash


Filtration unit - Martinic QS 500, on a pallet with Mr.Pump DE 18 pump, 18 m3/h, with a six-way valve Mr.Wash

Description

High-quality Martinic QS sand filtration is the ideal solution for efficient mechanical cleaning and maintaining crystal-clear water in your pool. Read more
Product code: 310112IWDE18

  • Filtration Unit - Martinic QS 500, on a pallet with Mr.Pump DE 18 pump, 18 m3 / h, with Mr.Wash 6-way valve

    The high-quality Martinic QS sand filtration system is the ideal solution for effective mechanical cleaning and maintaining crystal-clear water in your pool. The entire filtration system is built on a stable base plate, to which the robust Martinic polypropylene tank is firmly bolted. During development, the manufacturer placed great emphasis on user comfort and easy maintenance. The tank opens exactly in the middle, which significantly simplifies, speeds up, and makes periodic replacement of the filter sand or modern glass media much easier. Maximum tightness, strength, and safety of this split body are ensured by a robust steel clamp ring, which firmly connects the upper and lower parts of the tank and easily withstands water pressure.
    This filtration set is completed by a top-quality, bolted 6-way valve from the renowned Mr.Wash brand, which serves as the control center of the entire filtration system. Using the ergonomic control lever, you can easily switch between six different modes according to your pool’s current needs. In addition to the standard filtration mode, where water passes through the sand bed and is cleaned of impurities, the valve allows you to start backwashing to clean the sand itself, followed by rinsing to settle the filter media back into place. You can also use the circulation mode for quickly mixing pool chemicals without the water passing through the filter, the full water drain mode to discharge water into the drain (suitable, for example, when vacuuming coarse dirt from the bottom or when winterizing the pool), and last but not least the “closed” position, which completely shuts off water flow and is especially useful when servicing and cleaning the pump. Martinic QS combines long service life, high efficiency, and exceptionally easy operation in one package.


    Valve Positions and Their Functions

    The valve positions are as follows:

    • Pool filtration: Water is drawn from the skimmer or bottom drain, passes through the filtration system where it is cleaned, and then returns to the pool through the jets.
    • Backwash cycle: The filter media (sand) is cleaned, while the contaminated water is discharged to waste.
    • Rinse after backwash cycle: Used to remove fine dirt left after backwashing.
    • Draining water from the pool: If the pool is equipped with a bottom drain, it can be completely emptied.
    • Circulation bypassing the filter tank: Water bypasses the filtration system, suitable for example when priming the pump.
    • Closing the entire circulation system: Used to shut off the system during maintenance or cleaning of the pump prefilter.

    Package Contents

    • Martinic QS 500 filter tank
    • Mr.Wash 6-way side valve
    • Mr.Pump DE 18 pump
    • filtration pallet
    • connecting hose
    • user manual

    Technical Parameters of the Martinic QS 500 Filter

    • Tank material: Polypropylene
    • Tank diameter: 500 mm
    • Max. working pressure: 2 bar
    • Max. operating temperature: 40°C
    • Valve type: 6-way top
    • Sand filling: 75 kg (not included)

    Technical Parameters of the Mr.Pump DE 18 Pump

    • Product type: Inverter pump
    • Voltage: 220 / 240 V
    • Flow rate: 5 - 18 m3 / h
    • Power input: 0.75 kW
    • Max. head: 16 m
    • Output: 0.56 kW
    • For pools up to: 30 - 50 m3
    • Water temperature: 5 - 50 °C
    • Ambient temperature: -10 - 42°C
    • Noise level: 36 dB
    • Protection rating: IP 55
    • Suction / discharge connection - glued: 63 mm
    • Prefilter: Yes
    • Use: Suitable for both fresh and salt water with salt concentration up to 5 g/l
    • For salt water up to 5 g/l (<0.5%): Yes
    • Self-priming: Yes
    • Each unit tested: Yes
    • Warranty: 5 years
    • Seal warranty: 6 months
    • Weight: 9.4 kg

Share this product
Facebook  Twitter  Google  LinkedIn  Pinterest  Email 



Cookie settings
We use essential cookies for the functioning of our website, enabling the implementation of the basic functionalities of the website. You can disable these cookies by changing the settings of your internet browser, which may affect the operation of the website. We would also like to use non-essential cookies to help us improve the operation of our website. To allow them, please click on consent.
Cookies information
I agree Customize Decline
<Back
Detailed cookie settings
We use cookies to ensure the basic functions of the site and to improve your user experience. You can change your consent for each category at any time.
<Necessary cookies
 
Technical cookies are essential for the proper functioning of our website. These are mainly used to store your products in the cart, display your favorite products, set your preferences and purchasing process. We do not require your consent to use technical cookies, but we process them based on our legitimate interest. You can set your browser to block or notify you of such files. However, in this case, some parts of our website may not work properly.
<Analytical cookies
 
Analytical cookies allow us to measure the performance and number of visits to our website.
<Marketing cookies
 
Marketing cookies are used by advertising and social networks to customize the ads displayed so that they are as interesting as possible for you.
Enable all Enable selected Decline
Save Decline