 |
14/20 |  |
Aseko PP60 Redox Dosing Pump
Aseko PP60 Redox Dosing Pump
Description
PP60 Redox precisely measures the redox value of pool water using a long-life redox probe and, based on these measurements, automatically regulates the water’s redox potential. Read more
-
Aseko PP60 Redox Dosing Pump
The PP60 Redox accurately measures the redox value of pool water using a long-life redox probe and automatically regulates the water’s redox potential based on these measurements. It uses a high-quality peristaltic pump with a maximum output of 3.6 l/h. All information is clearly displayed on the touchscreen, which also makes it easy to set all important operating parameters. The PP60 Redox consists of a control unit, a measuring probe, and a dosing pump.
Suitable for pools and whirlpools with a volume of 1 - 250 m3 (maximum dosing pressure up to 1 bar).Advantages:
- Easy operation
- Compact design
- High-quality peristaltic pump
- Very easy installation
- Ideal for small spaces, such as whirlpools
Package Contents
- PP60 Redox dosing pump
- Long Life redox probe
- Peristaltic pump
- Injection valve 1x
- Suction set for 20 l canister
- Shut-off fitting 2x
- Wall plugs and screws
- Connecting PE tubing 15 m 1/4“ (6.35 mm) - transparent
Connecting the Measured Water
The pool water intended for measurement must be brought to the PP60 Redox probe. The shut-off fitting is installed in a D=50 plug with G1/4“ thread, glued into the T-piece. Tighten by hand only. Do not use pliers or any other tools.
- Measured water inlet connect to the pipe after the pump, before the filter and coagulation mixer.
- Measured water outlet connect to the pipe after filtration and heating, or to the overflow tank or skimmer.
To connect the measured water to your PP60 Redox, use the 1/4“ (6.35 mm) connecting tubing included in the package. For connecting the measured water tubing to the PP60 Redox, Aseko provides a unique Speedfit fitting.
- Connection push the connecting tubing into the Speedfit connector and then secure it by pulling on the tube.
- Disconnection press and hold the Speedfit circular collet and pull out the connecting tubing
- Inlet of the measured water into the PP60 Redox connect with the connecting tubing to the Speedfit fitting on the measured water filter.
- Outlet of the measured water from the PP60 Redox connect with the connecting tubing to the Speedfit fitting on the probe tank.
After connecting and opening the water supply, the PP60 Redox is ready to measure the disinfectant level in your pool so that it meets hygiene limits.
Technical Parameters
- Power supply: 230 V / 50 Hz
- Power input: 20 VA
- Fuse: T80 mA
- Pump output: 60 ml/h
- Category: II
- Protection: IP30
- Suitable for pools up to: 250 m3
- Operating temperature: +5 to +40 °C
- Maximum water pressure: 1 bar
- Weight: 2.2 kg
- Installation: wall-mounted
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
Availability:
