 |
64/72 |  |
Photometric Tester SafeSwim 7-in-1
Photometric Tester SafeSwim 7-in-1
Description
A simple and economical way to test water quality. This tester delivers accurate results for seven basic water parameters. Read more-
SafeSwim 7-in-1 Photometric Tester
The SafeSwim photometer is a smart way to always keep your pool or hot tub water crystal clear. This digital tester represents a new generation in water quality measurement. It allows you to quickly and easily check all important water values without complicated procedures or chemicals. Simply use the special test strips, which contain a precisely measured amount of reagents, and within seconds you get accurate results directly on the display. SafeSwim was designed with ease of use in mind - anyone can handle it, from professionals to everyday home pool owners. It helps maintain the water in ideal balance, protects equipment from deposits, and at the same time ensures that swimming is always safe, hygienic, and enjoyable. This compact and durable device is the perfect helper for anyone who wants full control over their water quality.
Advantages
- A simple and economical way to test water quality, providing accurate results for seven basic water parameters
- The tester works independently and stores the last 20 results for each parameter (no app required)
- Compact and waterproof IP-67 design
Measured parameters and their range:
- Free chlorine: 0.00 - 12.0 ppm
- Combined chlorine: 0.00 - 12.0 ppm
- Total chlorine: 0.00 - 12.0 ppm
- pH: 6.4 - 8.4
- Total alkalinity: 10 - 200 ppm
- Total bromine: 0.00 - 17.0 ppm
- Copper: 0.00 - 8.0 ppm
Package Contents
In addition to the tester itself, the package also includes a set of test strips for each reagent:
- SafeSwim photometric tester
- Free chlorine (DPD-11)
- Combined chlorine (DPD-31)
- pH
- Total alkalinity
- Total bromine
- Copper
In addition to the tester itself, the package also includes 6 test strips for each reagent (free chlorine (DPD-1); combined chlorine (DPD-3); pH; total alkalinity; total bromine; copper).
Quick Start Guide
1. Select the test type
- CL - Free, combined and total chlorine
- PH - pH value
- TA - Total alkalinity
- BR - Total bromine, cyanuric acid, phosphates, calcium
- CU - Copper
2. Fill the test chamber and set the zero value (Zero)
- Fill the chamber with water from the pool or hot tub.
- Then press the ZERO / ON button to zero the measurement.
3. Press READ and immerse the test strip for 20 seconds
- After pressing the READ button, place the test strip into the water and keep it submerged for approximately 20 seconds.
- For the most accurate result at water temperatures above 35 °C, remove the strip after 10 seconds.
4. Read the result after the countdown ends
- When the countdown ends, the result will appear on the display.
- Measurement accuracy is up to two decimal places (0.01), depending on the selected parameter.
-
Related products
Availability:
Availability:
Availability:
Availability:
Availability:New
Availability:
Availability:
Availability:
